|
|
|
|
|
|
| A
great addition for any multimeter, labscope scantool combination. For
example, test low current draws on fuel pumps, check for injector current
ramping and ignition module tests, view waveforms on your labscope or
simply connect it to your multimeter for digital readings. |
|
|
|
Model
CA-60A AC/DC mA Current Clamp |
|
|
|
|
|
|
|
|
|
|
 |
- Uses two
Hall-Effect sensors
- For use
with any multimeter with 200mV or/and 2V
ranges for direct readout (with an input impedance of
at least 1MΩ).
- LED indicator
lights up when the clamp meter power
is low.
- Zero adjustment
knob to compensate the hysteresis effect
in DC measurements.
- Transformer
ratio 10:1, 100:1
- Output
1mV/10mA, 1mV/100mA
- Current
Range 0 to 60Amps
- Accuracy
DC Amps ±1.5%
AC Amps ±2% (40Hz-2kHz)
AC Amps ±4% (2kHz-10kHz)
AC Amps ±6% (10kHz-20kHz)
- Jaw opening
capability - [9mm Conductor]
- Safety
Design meets IEC 1010-1, IEC 1010-2-032 CE
|
|
|
|
|
|
|
|