|
|
|
|
|
|
| A
great addition to any multimeter or labscope. Accurately measure current
and starter motor draws. For example, put the CA-600 with the Ultrascan
Combo and view minimum and maximum starter motor current and battery draw.
Save to PC or print out for diagnostic reports and reference information. |
|
|
|
Model
CA-600A AC/DC Current Clamp |
|
|
|
|
|
|
|
|
|
|
 |
- Uses two
Hall-Effect sensors
- For use
with any multimeter with 200mV or/and 2V
ranges for direct readout (with an input impedance of
at least 1MΩ).
- LED indicator
lights up when the clamp meter power
is low.
- Zero adjustment
knob to compensate the hysteresis effect
in DC measurements.
- Transformer
ratio 1000:1
- Output
1mV/10mA, 1mV/Amp
- Current
Range 0 to 600 Amps
- Accuracy
DC Amps ±2%+2A
AC Amps ±3% +2Amps
(50Hz-400Hz)
- Jaw opening
capability - [30mm Conductor]
- Safety
Design meets IEC 1010-1, IEC 1010-2-032 CE
|
|
|
|
|
|
|
|