Introduction
 
   

The Hanatech DCN-PRO scanner supports the latest Australian Ford and Holden vehicles, VZ Commodore, BF Falcon to 2006.

For Japanese domestic and imports, DCN supports hard to diagnose systems such as Nissan Hicas, Subaru WRX and up to 21 individual systems can be diagnosed on a SC 430 Lexus.

The latest upgraded Korean software now provides support with Help files, Immobiliser and Wiring diagrams.

Asian Software Upgrades include support for Suzuki and Daihatsu.

   HanatechLogo    
          
Hanatech DCN-PRO
 
Engine Promo Lexus Promo
  HanatechLogo      
           
Scan Data PID Graphing
Data Graphs

The DNC-PRO provides for data graphing of live data for sensors and actuators. Record the data or save and review the graphs later with the supplied free Host Pro PC software.

Simply choose the PID's (Parameter Identifier's) you wish to monitor and graph the data while on a road test or in the workshop.

This is a Hanatech scan tool function that provides for a more efficient data analysis!

  
Dual Voltmeter
Dual Voltmeter

Hanatechs DCN-PRO also includes a dual channel voltmeter. Very useful for checking voltage drops on the supply side and the ground side!

Other included multimeter functions are Duty Cycle mode, Frequency mode and Show All Mode - Volt, Duty Cycle, Frequency.

Measured data values are displayed centre screen in large easy to read digits and MIN/MAX data adds to the functionality of the scan tool multimeter mode.

  
Ignition Oscilloscope
Ignition Scope

Ignition Primary and Ignition Secondary analysis is a powerful function of the DCN-PRO Scanner.

Conventional Distributor type ignition and Distributorless Ignition type system waveforms are easily attained for display.

Measurements displayed include: Primary Voltage, Secondary Peak Voltage and Spark Burn Time.

Full descriptive HELP files are also provided for the igniton scope.
4 Channel Oscilloscope
4 Channel Oscilloscope
Another powerful option is the DCN-PRO 4 Channel Oscilloscope.

Use the channel pre-set menu, sensor pre-set menu or configure the range to suit your requirements! Displayed menus contain sub menus with on screen descriptions to help in oscilloscope functions and useage.

View waveforms in scope mode or view live data by interfacing the Host Pro software. Save waveforms to the scan tool internal memory or save your waveform data to your PC for later recall and to share with other Hanatech DCN-PRO users.
  
DCN-PRO Demo   << click to view DCN-PRO DIS secondary waveform capture (250KB Flash 8+)  
 

<< back to Scanners | more information >>

Home