Mount AutoEquip - Hanatech Ultrascan Plus Scanner Technical Information

Hanatech ULTRASCAN plus

Technical Information


Multi-Functional Scan Tool Cabling Schematic

view larger image

CPU:Dual 16 bit 33Mhz processor

Memory: 1 Mbyte SRAM

Program Card: 16 Mbyte (Extendable to 32 Mbyte)

LCD: 320 x 240 Graphic LCD with Back light

Input Device: Tactile Membrane Keypad

Language: English

Printer Connection: Generic PC Printer Parallel Interface

Power Supply DC 12 Volt

Appearance

  Colour: Dark Grey body with yellow safety boot
  Dimension: L 302.1mm W 171.9mm T 127.0mm
  Weight
     -Based on Australian, Korean, Japanese car kits
     -Main Unit: Approx. 1.5Kg
     -Full Set: Approx. 9.5Kg

Oscilloscope

  Four channels: View 4 scope graphs at one time
  High-speed scope: AD Converter Speed 1Mhz
  Sampling Rate: 500Khz with 2 channel
  19 pre-setup sensor selection
  Auto setup Standard Pattern display for sensors

  Multi-meter

  Two Channel
  Voltage Meter: DC ±150V
  Frequency Meter: 1hz~100Khz
  Duty Cycle: 0~99.9%
  Current Meter: 0±128A - Optional

  Ignition Pattern Analyser

  Primary & Secondary Ignition Pattern
  DLI or DIS engine
  Available for conventional distributor/distributorless
  Three way trigger signal pickup for distributorless
  Display Mode
     -Individual Waveform Single pattern for one cyl.
     -Parallel Waveform – Multiple patterns for cyls.
  Up to 6 cylinders
  Peak voltage bar graph display
  Batt. Volts. Ampere (-128~+128Amp: Optional)
  Dwell angle, spark time duration – Always


	view Scanner Power Supply
	view Data Link Connectors
	view USB-RS232C Interface
	view 4 Channel Oscilloscope

The Hanatech ULTRASCAN plus scan tool and Hanatech IM 2400 Gas Analyser interface allows for interaction of both scan data and emissions data.

view Analyser Screens 180KB pdf

HostPro PC program is included in the ULTRASCAN plus Kit. Record, save and replay scan data.

Saved data graphs enhances captured scan data!

view HostPro Demo 1.4MB Flash

This ULTRASCAN plus demo shows a 2 Channel setup for a waveform capture of Ignition Primary and Primary Current using Auto Dual Channel preset.

view 2 Chan. Demo 700KB Flash

Scan Function

Applicable Vehicles

Korean Cars: Hyundai, Daewoo, KIA, Samsung, Ssangyong

Japanese Cars: Toyota, Lexus, Honda, Acura, Mitsubishi, Nissan,Mazda, Suzuki etc.

Malaysian Cars: Proton and Peruda (optional)

American Cars: GM-Opel, Chevy, Ford, Corsa and Monza (optional)

Australian Cars: Holden and Ford Models, Australian and European manufactured (Global)

European: VW/Audi, Mercedes, BMW, Saab, Peugeot, Renault, Citroen

Generic CAN OBDII (SAE J1850 VPW and PWM, ISO 9141-2, KPW2000) compliant cars are included in each program card

Scan Range

Most Electronic Control Units, Engine, Automatic Transmission, ABS, SRS, Air Conditioner, Traction Control, Electronic Suspension, BEM, BCM etc.

Detailed Functions

Self Diagnosis: Trouble Code Detect and Erase, Data Stream (Live Data/Service Data/Sensor Data), Displays actual sensor output values

Data Stream Graph:

Graphs the data stream - up to 3 graphs in a display

Actuation Test: Activates or stops a certain actuator such as an in injector, purge valve or fuel pump (some vehicles may not support this function)

Assistant Function: Help message for repair, individual circuit diagrams of the sensors

Real time USB PC Interface: Windows based colour PC display via real time interface

Updates: Easy Update procedure by Internet download: automatic click-through from supplied Host Pro program and access to the Internet to always keep your scan tool up-to-date

Hanatech provides regular updates to scan tool graphic displays, supported functions, operating procedures and vehicles/systems applications.

Hanatech ULTRASCAN plus is a very powerful diagnostic scan tool with an inbuilt 4 Channel Oscilloscope. View a demo of 4 Channel Live Data, with waveform save, zoom and recall.

view 4 Chan. Demo 320KB Flash