Hanatech LEAK DETECTOR

 
 
 
Hanatech Leak Detector  

The vehicle is experiencing unstable idling, poor driveability, bad fuel economy, hard starting etc.

Yet a scan tool finds 'NO DTC' and a tune scope doesn't give you any clue.

 

How frustrating! Definitely it's time to consider checking for systems leakage.

 

Do not hesitate to give it a try with Hanatech Leak Detector.

 

It will help you pin-point the exact leak location in minutes.

 

Work efficiently! Be cost Effective! Save hours of wasted labour time!
 
 
 

Hanatech, the leading manufacturer of high-tech diagnostic equipment, has added the LEAK DETECTOR to its range of world famous diagnostic products.

 

This quality product offers you a low cost/high tech solution with great new features.


It represents fantastic value for money and will give you cost and labour time savings for years to come.

 

Remember - The only way to start your diagnostics is "back to basics".

 

 

  
 

APPLICATIONS
 

Vacuum Leaks: hoses, gaskets, valves, diaphragms, choke pull-offs, heated air intake control and diaphragm systems, EGR hoses, and controls.

 

Exhaust Leaks: manifold cracks, EGR valve feed tubes and passages, exhaust pipes, catalytic converter, muffler, heat control valves, and crossover passages.

 

Plus: Injector system leaks, evaporator control system leaks, oil leaks, under dash vacuum leaks, brake booster system leaks, head gasket leaks, cylinder leakage, air and water leaks, turbo/super charger system leaks and component replacements test prior to installation.

 

 

  
 

FEATURES
Variable Pressure Control

Variable Pressure Control

 

A great new feature - excessive or insufficient smoke pressure may result in incorrect diagnosis or even result in damage to a system.

 

The Hanatech Leak Detector variable pressure control allows you the freedom to adjust the pressure level at the turn of a knob.

 

Adjust the pressure to suit the application and the high quality gauge will lead you in the right direction to quickly find the leak.


Remember, low pressure smoke cannot always find the leak!

  
 
  Check Valve Quick Release

Check Valve Quick Release

 

The check valve is a pressure regulating device that releases smoke when the pressure exceeds a preset amount.

 

Most conventional smoke testers use non-toxic smoke liquids and its smoke turns into sticky liquid form and accumulates inside the valve when the machine cools down after operation. This may result in malfunction of the valve or may even block the valve.


Safety and performance is our goal and the Check Valve Quick Release is a performance enhancing feature that guarantees every test remains the same at all temperatures.


Simply lift the pressure regulator knob and release and test results are the same hot or cold.

  
 

 

High-Tech Electronic Control

 

High-Tech Electronic Control

 

Utilising Hanatech's electronic diagnostic experience, Leak Detector offers you the latest in CPU design, less moving parts and increased durability.


Soft touch membrane keypad, electronically controlled three stage heating circuit and accurate heating controls offer you reliability, quality and strength that other brands can't.

 

Hanatech Leak Detector ensures your safety and peace of mind.

 

The automatic electronic power controls ensure that unintended power-on is never an issue and the automatic smart control simply powers down when not in use.

 
 

 

Leak Detector Double Action Solenoid

 

Double Action Solenoid

 

It must be frustrating if the smoke flows back into the machine while you are searching for a leak after stopping the compressor.


Hanatech Leak Detector has two solenoids in the smoke delivery system and these devices block any reverse flow of smoke into the machine when the compressor is not running.


You can even check if there is an invisible tiny pin-hole leak by observing the dropping of the pressure gauge needle.

 

Parts and Components

Hanatech Leak Detector Parts and Components

 

 

Specifications

 
 

Dimensions : 460 - 300 - 200

 

Net Weight : 12.5Kg

 

Shipping Weight : 15Kg

 

Supply Volume 13 Litres/min

 

Power Supply : 12 Volt DC

 

Power Consumption : 3.5 Amps

 

Smoke Delivery Hose : 4 Metres

 

Remote Control Cable : 4 Metres

 

Power Supply Cable : 4 metres

 

Supply Pressure (adjustable) : 0.1 ~ 1.5Kg/cm²

 

Operating Temperature : 0°C ~ 40°C

 

Nozzle Adaptors - supplied kit assortment