Search - pico

Grid View:

PicoBNC+ 4 Channel Advanced Oscilloscope Kit

$6,422.90

PicoBNC+™ Picoscope - Pico Automotive Oscilloscope kit - 4 Channel Advanced Kit - (PQ180) This exciting brand new Pico Automotive scope model combines all the strengths of existing Automotive Pico scopes, but adds a smart interface for powered and intelligent accessories. This has been achieved by creating a new interface PicoBNC+&tra..

PicoBNC+ 4 channel Standard Oscilloscope Kit

$4,909.30

PicoBNC+™ PicoScope BNC+ 4 Channel Standard Kit - (PQ178) This very popular Pico automotive diagnostic kit gives you the ability to measure and record up to four signals simultaneously. It comes complete with a variety of accessories including leads, probes, clips and current clamps to allow virtually all the components on modern vehi..

PicoBNC+ 4 Channel Diesel Oscilloscope Kit

$4,860.90

PicoBNC+™ Pico Technology 4 Channel Diesel Oscilloscope Kit - (PQ179) This popular kit, configured especially for diesel repairers, gives you the ability to measure and record up to four signals simultaneously. It comes complete with a variety of accessories including leads, probes, clips and current clamps to allow virtually all..

PicoScope 4425A 4 channel EV kit

$8,187.30

Pico Scope EV Kit (PQ196) This is a new kit. It is optimised for technicians to be safely working on Electric Vehicles, but can be used on any vehicle or equipment. As with all kits, the accessories in this kit can be used with other kits, and vice versa. The kit is supported by a new set of EV Guided Tests that will be extended over the coming ..

P4425A PicoBNC+ 4 channel oscilloscope - Scope Only

$2,380.40

P4425A Pico Automotive 4 channel oscilloscope - Scope only This brand new Pico Automotive scope model combines all the strengths of our existing Automotive scope, but adds a smart interface for powered and intelligent accessories. This has been achieved by creating a new interface PicoBNC+™ which combines the standard BNC with a smart digi..

P4225A PicoBNC+ 2 channel Automotive Oscilloscope - Scope only

$1,488.30

P4225A - Pico Automotive oscilloscope 2 channel. Scope only This brand new Pico Automotive scope model combines all the strengths of our existing Automotive scope, but adds a smart interface for powered and intelligent accessories. This has been achieved by creating a new interface PicoBNC+™ which combines the standard BNC with a smart dig..

PicoBNC+ 4 Channel Master Oscilloscope Kit

$10,843.80

PicoBNC+™ Picoscope BNC+ - Pico Automotive Oscilloscope kit - 4 Channel Master Kit - (PQ194) The 4–Channel Master Kit is the ultimate in vehicle automotive oscilloscope diagnostics. The Pico 4–Channel Master Kit builds on the 4–Channel Advanced Kit by also including the most popular optional accessories such as th..

Out Of Stock
Quickview

PicoBNC+ 4 Channel Starter Kit

$2,874.30

PicoBNC+ Starter 4000 series 4 channel automotive pc based oscilloscope Starter kit.  Vehicle electronics continue to get more complex. Does this make it harder for you to find faults? With a PicoScope it doesn’t have to… A PicoScope is a PC based automotive oscilloscope (sometimes known as a labscope).&nbs..

PicoBNC+ 2 Channel Standard Oscilloscope kit

$3,737.80

PicoBNC+™ Pico Scope BNC+ 2 Channel Standard Automotive pc based oscilloscope Kit - (PQ177) The Pico BNC+ 2–Channel Standard Automotive Kit comes complete with a variety of accessories — including leads, ignition pickups, probes, clips and current clamps — allowing you to test virtually all the components on modern vehicl..

PicoBNC+ 2 Channel Starter Kit

$1,690.70

PicoBNC+™ Pico 2 Channel Starter Automotive Kit - (PQ175) The Pico 2–Channel Starter Automotive Kit comes complete with a range of accessories to get started— including leads, probes, clips etc — allowing you to test components on modern vehicles. The 2 channel starter kit is ideal for occasional use or ..

TA388 2000a Pico BNC+ current clamp

$438.02

PicoBNC+ current clamp: 2000A AC/DC To take advantage of the PicoBNC+ capabilities, the TA388 is powered from the laptop via the Scope. The shape of this new clamp has a nice narrow-width profile. The 2000A clamp is automatically recognised by PicoScope software when it is connected to the scope, and is auto-ranged in the software requiring no m..

TA473 Pico 60a BNC+ current clamp

$438.02

PicoBNC+ current clamp: 60A AC/DC To take advantage of the PicoBNC+ capabilities, this current clamp is powered from the laptop via the Scope. The shape of the new clamp is different and the performance is substantially higher than the previous clamp. The 60A clamp is automatically recognised by PicoScope software when it is connected to the Pic..

TA404 PicoBNC+ 4mm test lead Blue 3m

$87.23

PicoBNC+ Test Lead: 4mm permanent ground 3m Blue These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA405 Pico BNC+ 4mm test lead Red 3m

$87.23

PicoBNC+ Test Lead: 4mm permanent ground 3m Red These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA406 Pico BNC+ 4mm test lead Green 3m

$87.23

PicoBNC+ Test Lead: 4mm permanent ground 3m Green These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA407 Pico BNC+ 4mm test lead Yellow 3m

$87.23

PicoBNC+ Test Lead: 4mm permanent ground 3m Yellow These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA475 PicoBNC+ 4mm test lead Blue 5m

$114.31

PicoBNC+ Test Lead: 4mm permanent ground 5m Blue These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA476 Pico BNC+ 4mm test lead Red 5m

$114.31

PicoBNC+ Test Lead: 4mm permanent ground 5m Red These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA477 Pico BNC+ 4mm test lead Green 5m

$114.31

PicoBNC+ Test Lead: 4mm permanent ground 5m Green These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

TA478 Pico BNC+ 4mm test lead Yellow 5m

$114.31

PicoBNC+ Test Lead: 4mm permanent ground 5m Yellow These new BNC+ test lead versions are automatically recognised by PicoScope software when they are connected to the scope. ConnectDetect™ works as before with the new test leads...

Pico BNC+ Coil on Plug Probe

$295.90

New BNC+ Flexible Coil on plug inductive probe. With the TA398 COP Probe, the BNC lead is integral to the probe eliminating the need for separate earthing. The main body of the COP Probe is unchanged preserving the benefits of flexibility to access restricted areas. The probe is automatically recognised byPicoScope software when it is connected to ..

TA397 Pico BNC+ Secondary Ignition Pickup Lead

$87.18

Pico Secondary ignition pickup lead - capacitive with BNC+ connection. Automatically detected by Pico software. Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 i..

TA432 Pico BNC+ Resistance Lead

$114.29

This is a brand-new Pico lead and offers dynamic measurement of resistance which is a feature we are using within our EV guided tests. The TA432 offers a diode test function in addition to resistance measurements. The TA432 has a total lead length of 2m in a Y configuration, with the non-PicoBNC+ ends being 1m in length and terminated in a 4mm non-..

PP985 Pico Boom Kit

$347.27

The PicoScope Boom Kit allows you to store your PicoScope and all your commonly used leads conveniently while allowing for quick access. The Boom has slots for three current clamps and up to nine cables...

PQ099 Drawer Labels

$74.03

Set of two Pico Technology branded labels. 1 x small label (65 mm x 635 mm) –  intended for the top drawer of the trolley 1 x large label (295 mm by 635 mm) – intended for the bottom drawer on the trolley. Note: These labels may have to be cut to size to fit the different tool trolley drawers...

TA395 Pico BNC+ Temperature Probe

$132.83

The TA395 is a linear temperature lead measuring in the range -40°C to125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. Typical applications: Engine temperature. Typically +20 to +120 deg C Heated seat temp..

PA192 - Foam Insert 1

$95.92

Foam insert only. Pico Storage solutions. To fit 4425A/4225A BNC+ or 4425/4225 BNC PicoScope. Note: Pico accessories not included and available separately. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA194 - Foam insert 2

$95.92

Foam insert only. Pico Storage solutions. To fit PicoBNC+ 2000A TA388 current clamp, 60A TA473 current clamp, Coil on plug Probe Note: Pico accessories not included and available separately. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA195 - Foam Insert 3

$95.92

Foam insert only. Pico storage solutions. To fit BNC+ 2000A 2xTA388 current clamps & 60A 1xTA473 Current clamp Note: Pico accessories not included and available separately. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA198 - Foam insert 4

$95.92

Foam insert only. Pico storage solutions. To fit WPS500X pressure transducer and adaptors Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers. Note: Pico accessories available separately and not included...

PA199 - Foam insert 5

$95.92

Foam insert only. Pico storage solutions. To fit Noise vibration harshness (NVH dual interfaces) Note: Pico accesories available separately and not included. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA197 - Foam insert CAN Test Box

$95.92

Foam insert only. Pico storage solutions. To fit CAN test box and leads Note: Pico accesories available separately and not included. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA200 - Foam insert Breakout leads

$95.92

Foam insert only. Pico storage solutions. To fit additional breakout leads and probes Note: Pico accesories available separately and not included. Dimensions: 27 x 39 x 4 cm The foam tray includes a removable 2 cm strip so they will fit in 37 cm deep tool drawers...

PA111 - Foam insert CTB

$86.02

Foam insert only to fit CAN test box. Pico storage solutions. 1/3rd width at 185 x 390 mm The trays include a removable 20 mm strip so they will fit in 370 mm deep tool drawers. Note: Pico accessories available separately and not included.  ..

PQ184 PicoScope 8 Channel Oscilloscope kit

$10,879.00

PicoScope 4823 Professional kit Part # PQ184 The 4823 is the world’s first high-speed, high-resolution, 8-channel automotive oscilloscope, and is fast enough for CAN, CAN FD, and FlexRay including serial data decoding. It is ready-configured for automotive probes and includes more than 150 Guided tests, plus access to thousands of comparis..

Pico 2 Channel Starter Kit BNC

$1,457.50 $1,757.80

Pico 2 Channel Starter Automotive Kit - (PP920) The Pico 2–Channel Starter Automotive Kit comes complete with a range of accessories to get started— including leads, probes, clips etc — allowing you to test components on modern vehicles. The 2 channel starter kit is ideal for occasional use or for those on a l..

Out Of Stock
SALE
Quickview

Pico BNC 4 Channel Starter Kit

$2,517.90 $2,627.90

Pico Starter 4000 series 4 channel automotive pc based oscilloscope Starter kit.  Vehicle electronics continue to get more complex. Does this make it harder for you to find faults? With a PicoScope it doesn’t have to… A PicoScope is a PC based automotive oscilloscope (sometimes known as a labscope).  I..

P4225 Pico 2 channel Automotive Oscilloscope - Scope only

$1,318.30 $1,373.30

P4225 - Pico Automotive oscilloscope 2 channel. Scope only..

Out Of Stock
Quickview

P4425 Pico BNC 4 channel oscilloscope - Scope Only

$2,181.80

P4425 Pico Automotive 4 channel oscilloscope - Scope only..

Pico Mixmaster kit

$667.59

12 Channel automotive secondary ignition signal mixer. With the Mixmaster 12–channel automotive signal mixer you can view an ignition parade display of up to 12 cylinders on any lab scope...

Pico NVH Diagnostics Kit 3ch

$1,033.73

Pico Technology 3 channel Noise Vibration and Harshness diagnostic kit. Important note: The NVH kit from Pico Technology only works with Pico Automotive Oscilloscopes, and requires an unlock code in order to allow your PicoScope to work with the NVH software. This unlock key is limited to one PicoScope Automotive scope and is not trans..

Pico NVH Diagnostics Kit 4ch

$1,896.90

Pico Technology 4 channel Noise Vibration and Harshness diagnostic kit. Important note: The NVH kit from Pico Technology only works with Pico Automotive Oscilloscopes, and requires an unlock code in order to allow your PicoScope to work with the NVH software. This unlock key is limited to one PicoScope Automotive scope and is not trans..

Drew Technologies Mongoose Pro ISO/CAN 2

$571.67

MongoosePro® ISO/CAN 2 is a low-cost, high-performance vehicle network interface that connects a laptop directly to the OBDII connector. Designed to be an affordable USB to CAN and USB to K-line interface for OEM engineering, development, enthusiasts, and hobbyists. The package includes J2534 vehicle interface cable, installation CD with device..

Optical Sensor Kit - NVH accessory

$634.10

This kit is a companion to our NVH kits, providing a high-quality optical sensor and magnetic mount for use with our balancing software. Primarily used for balancing of propshafts (drive shafts), this kit also supports frequency measurement of other rotating items. When used with PicoDiagnostics balancing software, a simple graphical guide al..

PicoBNC+ Automotive 10:1 scope probe & adaptor

$104.26

Please note, you will be supplied either with a TA400 or TA499 probe. These probes have a fixed x10 attenuation and are intended for high-speed signals like CAN, FlexRay and also for higher voltage signals such as primary ignition. The TA499 has a fixed 4mm tip, where the TA400 has a detachable adaptor tip (TA411), allowing the probe to be used wit..

Microphone - Pico NVH accessory

$126.83

The TA144 is the standard Pico microphone for use with Pico's NVH Interface...

PP939 - Pico WPS Pressure Transducer Master Kit

$1,995.00

Pico Tech Pressure Transducer - WPS 500x kit With the uncompromising resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis of many automotive systems. The WPS500X features an extremely fast 100 µs response rate from 0% to 90% of full scale and sensitivity down to about..

PQ071 Pico Fuel Sight Block kit

$361.90 $379.38

The Pico PQ071 Fuel sight block kit is an accessory for the Pico WPS500 pressure transducer kit. The Sight block kit contains the sight block, a stop valve for testing a negative pressure fuel pump under load, and 3 sets of hose barbs for connecting to different size fuel hoses. The kit is intended for diagnosing problems with low-pressure..

TA323 Pico Diesel Glow Plug Adaptor kit

$750.20

The TA323 is an accessory kit to be used in conjunction with the WPS500x Pressure transducer and Pico automotive pc based oscilloscope (both sold separately). Add diesel compression testing to your list of uses with this glow plug adaptor kit. It contains 15 different glow plug adaptors and the adaptor that connects them to our standard universa..

PP833 WPS600c Pressure Transducer

$2,286.90

With high accuracy and a wide measuring range, the WPS600C Hydraulic Pressure Transducer connects to your PicoScope for convenient analysis and diagnosis of pressurized systems. Accurately measure up to 600 bar (8700 psi) Ultra-fast 100 microsecond response time (0% to 90% of full scale) Internal rechargeable LiPo battery Industry-stand..

Pico 0-2000 BNC Amp Current Clamp

$452.10

The 200 A / 2000 A current clamp with BNC connector allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. Before the launch of this probe we recommended the TA019 (600 A) for working on the starting and..

Pico BNC 0-30 Amp Current Clamp

$397.87

The TA234 is a 30 A current clamp with BNC adaptor. The extended measuring jaws allow measurement in a confined space. When measuring DC, a simple thumbwheel on the probe allows zero adjustment. This current clamp is ideally suited for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup. ..

Pico BNC 0-60 Amp Current Clamp

$296.84

The TA018 current clamp with BNC adaptor is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. The current clamp has two calibration settings, set by a slider switch on the handle of the probe. 1 mV/10 m..

Pico BNC 0-600 Amp Current Clamp

$296.84

The TA019 current clamp with BNC connector is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests. The current clamp can measure up to 600 A (AC or DC). In use there is no need to break into the circuit or disturb the isolation as the ..

Pico Coil on Plug Probe BNC

$262.79

Flexible Coil on plug inductive probe including BNC to BNC lead with ground The PP357 coil-on-plug (COP) and signal probe from Pico Technology is the fastest way to check coil-on-plug ignition coils and spark plugs. Find misfires fast Displays scope patterns of the secondary, faster than scoping the primary Works on all automotive scop..

Premium Test Lead Set (BNC-4mm)

$277.53

You’ve got the best oscilloscope, now get the best leads These premium leads are colour–coded so that the colour of the lead in the engine bay matches the colour of the on–screen waveform in PicoScope Automotive — never again will you waste your time wondering which lead is what. Our premium leads are fully s..

TA496 PicoBNC+ 60 A DC compact current clamp

$374.42

The PicoBNC+® equipped TA496 is a natural choice if you are a PicoScope 4225A and 4425A user looking to add a compact low amps clamp to your PicoScope probe collection. The PicoBNC+® 60 A DC compact current clamp’s reduced form factor fits comfortably in your hand and improves accessibility in tight and difficult to access test loc..

Pico COP Extension lead set (4)

$209.50

Coil on Plug extension lead Set of 4. Coil-on-Plug extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems. Coil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there ..

Pico Coil on Plug Extension Lead (Single)

$61.05

Coil on plug extension lead (Single) Coil-on-Plug extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems. Coil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there i..

PP178 Pico Secondary Ignition Pickup Lead (MI074) BNC

$85.55

Pico Secondary ignition pickup lead - capacitive with BNC (MI074) Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects aro..

TA329 Pico Ultrasonic Parking Sensor Detector BNC

$68.15 $97.90

Pico Technology Ultrasonic Parking Sensor Detector (***To be used as an accessory with Pico automotive oscilloscope. Pico automotive oscilloscope supplied separately.***) This 2 meter long lead and detector is intended to allow a technician to prove the correct operation of each of the ultrasonic parking sensors in turn. By directly showing the ..

MI007 60Mhz Oscilloscope Probe

$40.15

This high-quality general purpose oscilloscope probe has a 60 MHz bandwidth. A two-position slide switch allows attenuation of either x1 or x10 to be selected. This probe is particularly useful if you want to probe higher speed automotive CAN bus and FlexRay signals using the Pico oscilloscope...

Pico universal breakout lead set

$157.19 $192.28

Pico’s universal 6-way breakout leads eliminate the need to own many specific breakout leads for engine diagnostics. The breakout leads are available with four different sizes of connectors allowing you to connect to virtually any sensor in the engine compartment—of any vehicle—using just four leads. Never again will you need to s..

PP967 Fuse Extension lead set

$149.00

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and ..

TA034 Fuse extension std ATC

$34.10

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and ..

TA035 mini Fuse extension

$34.10

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and ..

TA191 Breakout Lead 3 pin Kostal

$75.57

TA191 Breakout Lead 3 pin Kostal..

TA197 Pico 10:1 attenuator BNC

$112.04

With high bandwidth and fault protection, the 10:1 attenuator allows you to measure fuel injector and primary ignition waveforms using PicoScope oscilloscopes. The TA197 is a passive 10:1 attenuator. This means that, for example, a 10 V signal at its input appears as a 1 V signal on its output. It allows voltages of up to 400..

TA230 Breakout Lead Delphi diesel injector small

$82.06

TA230 Breakout Lead Delphi diesel injector small..

PP992 Red Test Probe kit

$74.25

This kit is available in either black or red and contains all the commonly used Pico automotive test probes. Each kit contains: 2 x multimeter test probes 2 x small crocodile clips 2 x shrouded to unshrouded adaptors 2 x battery clips 2 x flexible back-pinning probes 1 x single dolphin clip. This kit is similar to the set of red probe..

PP993 Black test probe kit

$74.25

This kit is available in either black or red and contains all the commonly used Pico automotive test probes. Each kit contains: 2 x multimeter test probes 2 x small crocodile clips 2 x shrouded to unshrouded adaptors 2 x battery clips 2 x flexible back-pinning probes 1 x single dolphin clip. This kit is similar to the set of red probe..

TA001 Pico Multimeter Probe Black

$19.53

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. The 4 mm socket in the handle of the probe connects straight into one of our premium test leads. Length: 115 mm Diameter: 20 mm..

TA002 Pico Multimeter Probe red

$19.53

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. The 4 mm socket in the handle of the probe connects straight into one of our premium test leads. Length: 115 mm Diameter: 20 mm..

TA003 Pico Black crocodile clip

$10.89

The crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of the Pico premium test leads. The toothed grip offers good contact on fine wire, with a 11 mm jaw opening limit. Length: 57 mm Height: 19 mm Depth: 7 mm Clamping limit: 7 mm..

TA004 Pico Red crocodile clip

$10.89

The crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of the Pico premium test leads. The toothed grip offers good contact on fine wire, with a 11 mm jaw opening limit. Length: 57 mm Height: 19 mm Depth: 7 mm Clamping limit: 7 mm..

TA005 Pico Black Alligator clamp

$29.81

The crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 30 mm jaw opening limit. Length: 92 mm Height: 37.5 mm Depth: 15.3 mm Clamping limit: 30 mm..

TA006 Pico Red Alligator clamp

$29.81

The crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 30 mm jaw opening limit. Length: 92 mm Height: 37.5 mm Depth: 15.3 mm Clamping limit: 30 mm..

TA161 Pico Black Flexible back pinning probe

$12.54

Like the probes in the TA008, these probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have a flexible section that bends to improve access to difficult areas. Each probe fits onto the 4 mm plug of our BNC to 4 mm test leads. Note that, unlike the probes in the TA008, the probe tips are not replac..

TA162 Pico Red Flexible back pinning probe

$12.54

Like the probes in the TA008, these probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have a flexible section that bends to improve access to difficult areas. Each probe fits onto the 4 mm plug of our BNC to 4 mm test leads. Note that, unlike the probes in the TA008, the probe tips are not replac..

TA089 Pico Sprung hook probe Black

$12.65

These probes feature a shrouded 4 mm socket and allow you to hook your test lead onto small components. The hook can hold conductors up to 2 mm in diameter. Length: 121 mm Height: 23 mm Rating: 1000 volts CAT III 20 amps..

TA090 Pico Sprung hook probe red

$12.65

These probes feature a shrouded 4 mm socket and allow you to hook your test lead onto small components. The hook can hold conductors up to 2 mm in diameter. Length: 121 mm Height: 23 mm Rating: 1000 volts CAT III 20 amps..

TA157 Pico Red Battery Clamp

$13.75

These plier-type clips are designed for connection to the vehicle battery terminals and fit all our BNC-to-4 mm test leads...

TA158 Pico Black Battery Clamp

$13.75

These plier-type clips are designed for connection to the vehicle battery terminals and fit all our BNC-to-4 mm test leads...

TA016 Pico Black Shrouded to unshrouded adaptor

$11.50

These 4 mm shrouded to unshrouded adaptors allow the Pico standard and premium test leads to be connected to any breakout box with unshrouded 4 mm sockets...

TA017 Pico Red shrouded to unshrouded adaptor

$11.50

These 4 mm shrouded to unshrouded adaptors allow our standard and premium test leads to be connected to any breakout box with unshrouded 4 mm sockets...

Out Of Stock
Quickview

4423 Protective Rubber Boot

$68.15

The PicoScope protective rubber case helps absorb potentially damaging physical shocks to your PicoScope while still giving you unobstructed access to all connectors (being made of rubber, the protective case will also help prevent your PicoScope from damaging the paintwork of the vehicle you’re working on.) A replaceable bracket on the case all..

Pico S Hook

$17.49

This small but essential accessory makes it easy to keep all those test leads tidy in the engine bay. The S-hook is about 100 mm (4 in) long and coated in plastic and rubber to protect the vehicle's paintwork and your cables. Hook one end underneath the bonnet or hood, and use the other end to hang a bundle of cables up to about 25 mm (1 in)..

TA142 Foster Coupler

$18.48

A spare Foster series 2 to 1/8" NPT connector is available to enable the user to get additional hoses made for any custom requirements they may have not covered by the standard set of adaptors and hoses supplied by Pico for the WPS500X. Please note pressure hoses should always be made by a qualified professional and pressure tested before i..

Showing 1 to 88 of 88 (1 Pages)