Pico BNC 0-30 Amp Current Clamp

$397.87 incl. GST

Brand: Pico Technology

Product Code: TA234

Availability: Pre-Order

Viewed 13342 times

Qty

Add to wishlist
Add to compare

Categories Cart Account Search Recent View

Example Current waveform below from a Piezo diesel injector using Pico Scope.

Electrical data
Nominal current	30 A AC peak or DC
Measuring range (s)	30 mA to 30 A DC (accurate) 5 mA to 30 A DC (usable)
Overload capacity	500 A for 60 s
Output sensitivity	100 mV/A
Accuracy	±(2% of reading ± 2 mA)
Resolution	± 1 mA DC after filtering
di/dt tracking capability	> 20 A/µs
Conductor position sensitivity	± 1% relative to center
Temperature coefficient	0.1 x specified accuracy/°C (0 °C to 18 °C, 28 °C to 50 °C)
Frequency range	DC to 20 kHz (–0.4 dB)
Battery type	9 V PP3, MN 1604, 6F22, 6LR61
Min. load impedance	1 MΩ

General data
Max. conductor size	19 mm diameter
Output cable and connectors	2 m long coax terminated with safety BNC connector
Operating temperature	+4 °C to +40 °C
Storage temperature (excluding battery)	–20°C to +70°C
Humidity	0 to 80 %RH
Altitude	0 to 2000 m
Weight	300 g
Dimensions (H x W x D)	200 mm x 72 mm x 38 mm
Pollution degree	2
Safety	EN 61010-1:2010 EN 61010-2-032:2012 CAT IV 600 V, CAT III 1000 V
EMC	EN 61326-1:2006 EN 61326-2-2:2006
Environmental	RoHS and WEEE compliant

Example Current waveform below from a Piezo diesel injector using Pico Scope.

Product Description

The TA234 is a 30 A current clamp with BNC adaptor. The extended measuring jaws allow measurement in a confined space. When measuring DC, a simple thumbwheel on the probe allows zero adjustment.

This current clamp is ideally suited for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup.