Carbon Zapp CRU.2r

Carbon Zapp CRU.2r

POA
Brand:
Product Code: CRU.2r
Availability: Pre-Order
Viewed 2027 times

Tests Performed

eRLC     Electrical test for Ohm / uH / uF

LKT       Static Back leak test

NOP      Nozzle Opening Pressure test

iVM       Injector Volume Measuring test

Full-Load Test (performance or smoke issues)

Medium-Load (emissions issues & overall operation)

Low-Load Test (rough idle, start-up issues)

Small-Injection Test (pre/post-injection & knocking)

RSP       Injector response time test  (emissions / performance / knocking / irregular operation)

SPR       Injector nozzle spray quality test

iCD        Injector Coding (where  applicable)

Spray Chamber

High Visibility spray chamber for clear view of injected pattern at all pressures. You can virtually see the multiple injections as happening in the cylinder. Diagnosis of: NOP, incorrect spraying, leaky or seized injectors.

Injector Clamp

Ergonomic, robust, fast and simple clamping function.

Dual Function System

Test System: Performs only testing of the injector using calibration oil.

Test & clean system: Performs testing of the injector using calibration oil and also internal flushing/cleaning of the injector using specially formulated treatment detergent (optional).

* Boost Voltage (HV) up to 250V for New Piezo systems   
* Clear protective test bench cover
* CR Injector Coding
*  Dynamic & Static tests
* Ergonomic and dynamic design
* Fast and easy transition between spray and volumetric test
*  Fast & simple clamping 
*  Fully programmable charging and discharging Piezo signal profiles
*  High Voltage Peak A. Battery Peak A. and Battery Hold A. Control fully programmable
*  Glass level indicators
*  Injector protection function
*  Language Localization
*  Manufacturer / User Injector Database (upgradeable)
*  Manufacturer Injector Database (Bosch. Delphi. Denso. Conti-VDO)
*  Measurement of Injection response time RSP optional
*  Multiple Injections (programmable)
*  PCB protection circuit
*  Piezo Injector Individual Return regulators
*  Piezo, Solenoid & Dual Solenoid actuation (0-250 Volts/0-35A)
*  Quality & robust
*  Short testing time required
*  Spill free quick-connectors for discharge and return hoses
*  Up to 2450Bar system (optional)
*  Variable & customisable Test-Plans (independent for every injector)
*  User-friendly

View the Carbon Zapp CRU.2i Catalogue here

 

Download Complete Carbon Zapp Catalogue Below

Please note: CRU.2i model shown in Videos

 

CRU2.i Report Saving/Printing

CRU2.i Testing Spray Pattern

CRU2.i Testing Nozzle Opening Pressure

CRU.2i Injector Volume Metering test 

CRU.2i Leak Test

CRU.2i Injector Electrical Test 

CRU.2i Injector Mounting procedure

Product Description

The Common Rail innovative testing solution. The unique, compact, economic and advanced solution for every workshop to service diesel injection systems.

Automatic, fast and advanced service station for Common Rail diesel injectors.

Tests all CRDi injectors Denso, Delphi, Siemens (VDO), Bosch. Coil and Piezo. Including saved reports, printable. Automatic.

Capabilities

Repeatable and Accurate Electronic Mass Measurement

Under 8 minutes testing phase/injector

Multiple-Injection metering capability

Up to 2450 Bar

RSP (usec) available for all injectors, including database

Easy to operate and full automatic operation

CR Injector Coding (where applicable)

Diesel Expert level of diagnosis

Dynamic Electronic Measurement (BK)

10" Touchscreen HMI