Pico Accessories

Grid View:

Optical Sensor Kit - NVH accessory

$634.10

This kit is a companion to our NVH kits, providing a high-quality optical sensor and magnetic mount for use with our balancing software. Primarily used for balancing of propshafts (drive shafts), this kit also supports frequency measurement of other rotating items. When used with PicoDiagnostics balancing software, a simple graphical guide al..

PicoBNC+ Automotive 10:1 scope probe & adaptor

$104.26

Please note, you will be supplied either with a TA400 or TA499 probe. These probes have a fixed x10 attenuation and are intended for high-speed signals like CAN, FlexRay and also for higher voltage signals such as primary ignition. The TA499 has a fixed 4mm tip, where the TA400 has a detachable adaptor tip (TA411), allowing the probe to be used wit..

Red Pico Premium Test Lead: BNC to 4 mm, 3 m

$94.45

You’ve got the best oscilloscope, now get the best leads Our Pico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. Our Pico premium leads are fully screen..

Yellow Pico Premium Test Lead: BNC to 4 mm, 3 m

$94.45

You’ve got the best oscilloscope, now get the best leads Our Pico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. Our Pico premium leads are fully s..

Microphone - Pico NVH accessory

$126.83

The TA144 is the standard Pico microphone for use with Pico's NVH Interface...

Single Mounting Magnet for NVH accelerometer

$84.21

Mounting magnet for NVH kit accelerometer..

PP939 - Pico WPS Pressure Transducer Master Kit

$1,995.00

Pico Tech Pressure Transducer - WPS 500x kit With the uncompromising resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis of many automotive systems. The WPS500X features an extremely fast 100 µs response rate from 0% to 90% of full scale and sensitivity down to about..

PQ071 Pico Fuel Sight Block kit

$361.90 $379.38

The Pico PQ071 Fuel sight block kit is an accessory for the Pico WPS500 pressure transducer kit. The Sight block kit contains the sight block, a stop valve for testing a negative pressure fuel pump under load, and 3 sets of hose barbs for connecting to different size fuel hoses. The kit is intended for diagnosing problems with low-pressure..

TA323 Pico Diesel Glow Plug Adaptor kit

$750.20

The TA323 is an accessory kit to be used in conjunction with the WPS500x Pressure transducer and Pico automotive pc based oscilloscope (both sold separately). Add diesel compression testing to your list of uses with this glow plug adaptor kit. It contains 15 different glow plug adaptors and the adaptor that connects them to our standard universa..

First Look Pressure Transducer kit

$809.60

FirstLook™ Automotive Pulse Sensor The FirstLook™ Pulse Sensor provides a fast and accurate means of diagnosing automotive engine problems such as; cylinder head valve sealing failures, worn camshaft lobes, lifter base wear and faulty or failing injectors. FirstLook™ Pulse Sensor is inserted into a vehicle'..

PP833 WPS600c Pressure Transducer

$2,286.90

With high accuracy and a wide measuring range, the WPS600C Hydraulic Pressure Transducer connects to your PicoScope for convenient analysis and diagnosis of pressurized systems. Accurately measure up to 600 bar (8700 psi) Ultra-fast 100 microsecond response time (0% to 90% of full scale) Internal rechargeable LiPo battery Industry-stand..

Pico 0-2000 BNC Amp Current Clamp

$452.10

The 200 A / 2000 A current clamp with BNC connector allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. Before the launch of this probe we recommended the TA019 (600 A) for working on the starting and..

Pico BNC 0-30 Amp Current Clamp

$397.87

The TA234 is a 30 A current clamp with BNC adaptor. The extended measuring jaws allow measurement in a confined space. When measuring DC, a simple thumbwheel on the probe allows zero adjustment. This current clamp is ideally suited for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup. ..

Pico BNC 0-60 Amp Current Clamp

$296.84

The TA018 current clamp with BNC adaptor is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. The current clamp has two calibration settings, set by a slider switch on the handle of the probe. 1 mV/10 m..

Pico BNC 0-600 Amp Current Clamp

$296.84

The TA019 current clamp with BNC connector is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests. The current clamp can measure up to 600 A (AC or DC). In use there is no need to break into the circuit or disturb the isolation as the ..

Showing 31 to 45 of 89 (6 Pages)