Test Leads (BNC+ and BNC)
This is a brand-new Pico lead and offers dynamic measurement of resistance which is a feature we are using within our EV guided tests. The TA432 offers a diode test function in addition to resistance measurements. The TA432 has a total lead length of 2m in a Y configuration, with the non-PicoBNC+ ends being 1m in length and terminated in a 4mm non-..
The TA395 is a linear temperature lead measuring in the range -40°C to125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. Typical applications: Engine temperature. Typically +20 to +120 deg C Heated seat temp..
Please note, you will be supplied either with a TA400 or TA499 probe. These probes have a fixed x10 attenuation and are intended for high-speed signals like CAN, FlexRay and also for higher voltage signals such as primary ignition. The TA499 has a fixed 4mm tip, where the TA400 has a detachable adaptor tip (TA411), allowing the probe to be used wit..
You’ve got the best oscilloscope, now get the best leads These premium leads are colour–coded so that the colour of the lead in the engine bay matches the colour of the on–screen waveform in PicoScope Automotive — never again will you waste your time wondering which lead is what. Our premium leads are fully s..
Pico Technology Ultrasonic Parking Sensor Detector (***To be used as an accessory with Pico automotive oscilloscope. Pico automotive oscilloscope supplied separately.***) This 2 meter long lead and detector is intended to allow a technician to prove the correct operation of each of the ultrasonic parking sensors in turn. By directly showing the ..
The TA330 is a detector intended to allow a technician to detect the presence of the keyless entry carrier frequency in the range 125 to 140 kHz (as used by most manufacturers). The device has a short range by design, allowing the technician to check each pickup coil in turn and hence identify a faulty unit. The detector does not pick up or de..
With high bandwidth and fault protection, the 10:1 attenuator allows you to measure fuel injector and primary ignition waveforms using PicoScope oscilloscopes. The TA197 is a passive 10:1 attenuator. This means that, for example, a 10 V signal at its input appears as a 1 V signal on its output. It allows voltages of up to 400..