PicoBNC+ current clamp: 2000A AC/DC To take advantage of the PicoBNC+ capabilities, the TA388 is powered from the laptop via the Scope. The shape of this new clamp has a nice narrow-width profile. The 2000A clamp is automatically recognised by PicoScope software when it is connected to the scope, and is auto-ranged in the software requiring no m..
PicoBNC+ current clamp: 60A AC/DC To take advantage of the PicoBNC+ capabilities, this current clamp is powered from the laptop via the Scope. The shape of the new clamp is different and the performance is substantially higher than the previous clamp. The 60A clamp is automatically recognised by PicoScope software when it is connected to the Pic..
New BNC+ Flexible Coil on plug inductive probe. With the TA398 COP Probe, the BNC lead is integral to the probe eliminating the need for separate earthing. The main body of the COP Probe is unchanged preserving the benefits of flexibility to access restricted areas. The probe is automatically recognised byPicoScope software when it is connected to ..
Pico Secondary ignition pickup lead - capacitive with BNC+ connection. Automatically detected by Pico software. Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 i..
This is a brand-new Pico lead and offers dynamic measurement of resistance which is a feature we are using within our EV guided tests. The TA432 offers a diode test function in addition to resistance measurements. The TA432 has a total lead length of 2m in a Y configuration, with the non-PicoBNC+ ends being 1m in length and terminated in a 4mm non-..
Set of two Pico Technology branded labels. 1 x small label (65 mm x 635 mm) – intended for the top drawer of the trolley 1 x large label (295 mm by 635 mm) – intended for the bottom drawer on the trolley. Note: These labels may have to be cut to size to fit the different tool trolley drawers...