You’ve got the best oscilloscope, now get the best leads Our Pico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. Our Pico premium leads are fully screen..

This kit is a companion to our NVH kits, providing a high-quality optical sensor and magnetic mount for use with our balancing software. Primarily used for balancing of propshafts (drive shafts), this kit also supports frequency measurement of other rotating items. When used with PicoDiagnostics balancing software, a simple graphical guide al..

The PQ316 kit includes the high-quality TA497 PicoBNC+ optical sensor that connects directly to your PicoScope, and a robust magnetic mount to ensure it is held in the correct position. When compared to its BNC equipped counterpart (using the TA186 optical sensor), the TA497 optical sensor has several ease-of-use benefits: It does not need to be se..

The kit comprises the following 19 different sized sets of 4 universal breakout leads and a set of back-pinning probes: 14 sets with flat blade connectors in different sizes (0.6 mm,  0.8mm,  0.84mm, 1.0mm, 1.2 mm, 1.3mm, 1.5mm, 2.0 mm, 2.3 mm, 2.8 mm, 4.8 mm, 6.0 mm, 8.0mm, 8.3mm). 4 sets with round pins in different sizes (1.5 mm, 2..

PQ298   PicoScope 4425A EV upgrade kit in foam    Note: This is an add on accessory kit for a user with a 4425a BNC+ scope. Add this upgrade kit to a 4 channel BNC+ standard, Advanced or Master oscilloscope kit Contents 1 x Insulation test meter 1 x Differential probe 2 x 0-2000amp BNC+ current clamps 1 x Tw..

You’ve got the best oscilloscope, now get the best leads Our Pico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. Our Pico premium leads are fully screen..

A black 3 m extension cable for Pico's NVH interface...

Passive oscilloscope probe: 100MHz bandwidth 1:1/10:1 switchable, BNC This high-quality general purpose oscilloscope probe has a 100 MHz bandwidth. A two-position slide switch allows attenuation of either x1 or x10 to be selected. This probe is particularly useful if you want to probe CAN bus and FlexRay signals. This probe has replac..

You’ve got the best oscilloscope, now get the best leads Our Pico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. Our Pico premium leads are fully s..

The TA144 is the standard Pico microphone for use with Pico's NVH Interface...

Mounting magnet for NVH kit accelerometer..

Pico Tech Pressure Transducer - WPS 500x kit With the uncompromising resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis of many automotive systems. The WPS500X features an extremely fast 100 µs response rate from 0% to 90% of full scale and sensitivity down to about..

The TA323 is an accessory kit to be used in conjunction with the WPS500x Pressure transducer and Pico automotive pc based oscilloscope (both sold separately). Add diesel compression testing to your list of uses with this glow plug adaptor kit. It contains 15 different glow plug adaptors and the adaptor that connects them to our standard universa..

  High quality 'Red' insulated oscilloscope lead, BNC to 4mm that suits Finest 1005 oscilloscope.  ..

  High quality 'Yellow' insulated oscilloscope lead, BNC to 4mm that suits Finest 1005 oscilloscope.  ..