PicoScope 4425A 4 channel EV kit

PicoScope 4425A 4 channel EV kit

$7,562.50 incl. GST
Product Code: PQ196
Availability: In Stock
Viewed 7697 times

Kit Contents - Part Description Qty

MI121 Cable: USB2 4.5m x 1

MI168 S Hook x 2

PA212 Carry Case: 4425A EV kit x 1

PR340 Finished Product PS4425A x 1

TA001 Multimeter style test probe (black) x 1

TA002 Multimeter style test probe (red) x 1

TA003 Small crocodile clip (black) x 2

TA004 Small crocodile clip (red) x 2

TA005 Dolphin clip 1000V CATIII (black) x 1

TA006 Dolphin clip 1000V CAT III (red) x 1

TA017 4mm shrouded to unshrouded adaptor red x 4

TA034 Breakout lead for ATC style fuses x 1

TA035 Extension lead for mini style fuses x 1

TA057 Differential Probe: x20/x200 25MHz 1400V CATIII x 1

TA155 Cable: USB 3.0 blue 1.8m x 1

TA157 Battery clip 4mm socket (red) x 2

TA158 Battery clip 4mm socket (black) x 2

TA168 Extension lead for JCASE fuse x 1

TA206 Extension lead for maxi style fuses x 1

TA329 Ultrasonic Parking Sensor Detector x 1

TA330 Keyless Entry Detector x 1

TA388 PicoBNC+ 2000A current clamp BNC x 3

TA395 PicoBNC+ wide-range linear temperature probe x 1

TA398 PicoBNC+ Insulated COP and signal probe x 1

TA499 PicoBNC+ automotive 10:1 scope probe Aftermarket x 2

TA404 PicoBNC+ Test Lead: 4mm permanent ground 3m Blue x 1

TA405 PicoBNC+ Test Lead: 4mm permanent ground 3m Red x 1

TA406 PicoBNC+ Test Lead: 4mm permanent ground 3m Green x 1

TA407 PicoBNC+ Test Lead: 4mm permanent ground 3m Yellow x 1

TA432 PicoBNC+ resistance test lead x 1

TA458 1000V back pinning probe (black) x 2

TA459 1000V back pinning probe (red) x 2

TA466 Pico 2-pole tester x 1

TA467 Pico Insulation tester x 1

TA473 PicoBNC+ 60A Clamp x 1


 

 

 

 

 

 

 

 

Product Description

Pico Scope EV Kit (PQ196)

This is a new kit. It is optimised for technicians to be safely working on Electric Vehicles, but can be used on any vehicle or equipment. As with all kits, the accessories in this kit can be used with other kits, and vice versa. The kit is supported by a new set of EV Guided Tests that will be extended over the coming months as new systems, routines and faults become apparent over time. The key elements of the kit are 3 high-current clamps, a 2-pole voltage tester, PC-linked insulation tester, and a high-voltage differential probe.

The kit covers a wide variety of systems and all vehicle technologies:

48V Mild Hybrids

  • Starting and Charging systems both 48V and 12V
  • Cell measuring on 48V Battery
  • DC-DC Charging
  • Standard ICE testing

Full & Plugin Hybrid

  • Insulation component testing
  • 3 phase current testing where possible
  • MG position sensor testing
  • DC-DC Charging
  • CP and PP charging confirmation
  • Standard ICE testing
  • Safe shut down and start up sequence
  • Power output measurements with current and voltage

BEV (Battery Electric Vehicle)

  • Safe shut down and start up sequence
  • Insulation component testing
  • MG position sensor testing
  • DC-DC Charging
  • 3 phase current testing where possible
  • CP and PP charging verification
  • Power output measurements with current and voltage
  • Safe shut down and start up
  • Insulation component testing
  • MG position sensor testing
  • DC-DC Charging
  • 3 phase testing where possible
  • Main air pump testing
  • Power output measurements with current and voltage