Pico NVH Diagnostics Kit 4ch

Pico NVH Diagnostics Kit 4ch

$1,738.00 incl. GST
Product Code: NVH Kit 4 ch
Availability: In Stock
Viewed 127 times

The PicoDiagnostics NVH Kit form is the cost-effective answer to the many NVH problems facing technicians today. Providing real-time diagnosis to the technician in the form of either: a bar graph, a frequency chart, a 3D frequency chart, RPM order or road speed view. The ability to start the recording before a road test, and play back the recording for analysis on your return, ensures that driver attention remains on the road. Saving the recordings couldn’t be simpler: much like our other automotive software you simply save the file to your laptop’s hard drive.

The PicoDiagnostics NVH kit makes use of the PicoScope 4000 Series Automotive oscilloscope, and comes complete with everything you need (J2534, Scantool or VCI not supplied). You can be sure that your investment in the PicoDiagnostics NVH kit will benefit your business without the need for further spending. If you already have a PicoScope 4000 Series Automotive oscilloscope, you’re halfway there

 

Kit contents

A BNC cable connects the interface box to an Automotive PicoScope (sold separately). A USB cable connects your PicoScope to PC or laptop to run the PicoDiagnostics software. A Separate J2534 Scantool or VCI can be used to provide RPM data, but is not supplied.

Your PicoDiagnostics 4 axis NVH Kit contains the following items:

2 x Single-output NVH interface unit

2 x Mounting magnet for accelerometer

Carry case for NVH kit

Cable: insulated BNC to insulated BNC

2 x MEMS accelerometer

Microphone for NVH Kit

Sensor extension cable for NVH interface unit

The NVH Kit can be typically used for the following examples:

Cabin Vibrations at speed

Engine vibrations throughout the entire rev range

Clutch judder/vibration

Transmission and bearing whine

Auxiliary drive noise

Brake judder

Steering vibrations 

Weight (interface / vibration sensor / microphone) 120 g / 80 g / 20 g
Dimensions:
Sensor interface (inc. BNCs)
Microphone
Magnet (inc. fitted grub screw)

105 mm x 65 mm x 27 mm
43 mm x ø17 mm
12 mm x ø18 mm
Sensor extension lead length 3 m
Battery (lithium primary cell) CR123(A) 3 V (user-replaceable)
Battery life (shelf / vibration mode / microphone mode) 10 years / 6 months / 2 months
Maximum measurable acceleration ±5 g
Vibration frequency range (3 dB) DC to 350 Hz
Shock survivability (accelerometer head) 10,000 g
Temperature range (operating)
accelerometer head

–40 °C to 85 °C
Thread mounting (accelerometer) ¼” x 28 UNF
Microphone sensitivity 45 mV/Pa, nominal, at 1 kHz
EMC approvals CE: Meets EN61326-1:2006

Product Description

Pico Technology 4 channel Noise Vibration and Harshness diagnostic kit.

Important note: The NVH kit from Pico Technology only works with Pico Automotive Oscilloscopes, and requires an unlock code in order to allow your PicoScope to work with the NVH software. This unlock key is limited to one PicoScope Automotive scope and is not transferable. Supported PicoScope models are 4425, 4225, 4423, 4223.

  • Includes accelerometer and microphone

  • Full screen, high-resolution results are presented clearly and accurately

  • No external memory required – saves directly to laptop or PC

  • Record up to 500 seconds of data

  • Automatic analysis

  • Detects multiple vehicle vibrations

  • Customer report function

  • Plugs into your Automotive PicoScope® (sold separately)